Lutron RA2 Select In-line Switch

Save £22.01
LutronRRK-R6ANS-240

Price:
£109.99 £132
Stock:
In Stock

FAST & FREE DELIVERY On All Orders Over £49
LIFETIME SUPPORT Speak To Our Tech Experts Anytime
30 DAY RETURNS Changed Your Mind? Send It Back.

Description

The RA2 Select family of in-line dimmers and switches can control lighting and motor loads both locally and remotely when paired with Pico wireless controls or Radio Powr Savr occupancy / vacancy sensors.

This provides a system that is convenient and easy to install. RA2 Select in-line load controls use Lutron patented Clear Connect RF technology which provides reliable, wireless communication with other RA2 Select devices.

Each load control can be controlled individually using a Pico wireless control.

Using a RA2 Select main repeater allows devices to be part of a whole house solution that can be controlled remotely from anywhere in the world.

Features

  • The dimmer is trailing edge capable of 1 W minimum load and up to 250 W of LED, incandescent, halogen, or ELV loads.
  • The switch is rated for 6 AX of general purpose lighting load and 2 A 0.5 HP of motor load.
  • Allows remote control from anywhere in the space when paired with Pico wireless controls.
  • When used with the RA2 Select main repeater, the load controls can be programmed via the Lutron App* to incorporate lighting scenes and schedule daily events. Also, the load controls can also be controlled from anywhere in the world.
  • To maximize energy savings and provide hands-free operation, load controls can be turned on/off automatically via Radio Powr Savr occupancy /vacancy sensors. • Small size allows for simple retrofit installation.
  • Remote device association allows for in-line controls to be added to a system without physically accessing product.

Specifications

Power

220–240 V~ 50/60 Hz

Typical Power Consumption

Dimmer/Switch: < 0.5 W Test conditions: Load and LED are off

Regulatory Approvals 

CE

Environment

Ambient operating temperature: 0 °C to 40 °C (32 °F to 104 °F), 0% to 90% humidity, non-condensing. Indoor use only

Communications

RA2 Select in-line load controls communicate with the system through Radio Frequency (RF). They must be located within 18 m (60 ft) line-of-sight or 9 m (30 ft) through walls of a Pico wireless control, Radio Powr Savr sensor, or RA2 Select repeater. System devices operate at 868 MHz

ESD Protection

Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.

Surge Protection

Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits.

Power Failure

Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.

Mounting

Allow adequate space to ensure convective cooling of load control. Remove any insulation, heat generating equipment, or obstructions within 120 mm (4.75 in) of the load control.

For optimal RF performance, no metal or other electrically conductive material should be present within 120 mm (4.7 in) around the top and sides of the load control. The load control is not suitable for installation in places where it is fully enclosed in metal (e.g., metal enclosures, electrical cabinets) or within metal ceilings.

Wiring

RA2 Select in-line controls accept wire gauges between 0.5 mm2 to 2.5 mm2 (20 AWG to 14 AWG).

Note: All outside wire diameters must be the same and must be between 5.2 mm–8.5 mm (0.2 in–0.3 in).

Device Limits

Up to 100 devices (e.g., load controls, Pico wireless controls, Radio Powr Savr sensors, shades, and repeaters) are supported per system.

The main repeater counts as one device and four locations are reserved for wireless repeaters. Note: Load controls have load type and capacity limits. For more information, see Load Type and Capacity

Dimensions

Height: 153mm
Width: 46mm
Depth: 32mm

Load Type and Capacity

RRK-R25NE-240

Voltage - 220–240 V~ 50/60 Hz

Load Types - 1 A 250 W – Incandescent, halogen, ELV | 1 A 250 W – LED*

RRK-R6ANS-240

Voltage - 220–240 V~ 50/60 Hz

Load Types - 6 AX Lighting (all types) | 2 A/0.5 HP Motor

Compatible Power Boosters and Load Interfaces

Some local controls can be used to control power boosters or load interfaces. Up to three power boosters or load interfaces can be used with one control. See table below for a list of controls and compatible power boosters and load interfaces.

RRK-R25NE-240

  • ELV interface NGRX-ELVI-CE 
  • Power Booster NGRX-PB-CE
  • 0-10 V interface GRX-TVI

RRK-R6ANS-240

  • 0-10 V interface GRX-TVI

Reviews

Why Buy From Tech4

Payment & Security

American Express Apple Pay Google Pay Maestro Mastercard PayPal Shopify Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed