Keene KLABKIT 20W Wall Mount Audio Amplifier (Inc UK PSU)

KeeneKLABKIT

Price:
£92.50
Stock:
Sold out

Description

KLAB20 Amplifier with White Front (with UK power supply) A 20W (RMS per channel) amplifier that fits flush to the wall!





The Keene K-LAB-20 is a unique product ideal for use in multi-room audio installations. It is a high quality stereo audio amplifier that's built into a standard sized UK double pattress. It provides 20W (RMS per channel) of amplification eliminating the need to make space for a conventional amplifier. It draws its own power from an externally located mains adaptor and control is by infra red remote.



Key Features




  • Flush mount - fits into a wall

  • IR control - Full remote control (carrier frequency 56 KHz)

  • 20W RMS per channel

  • Fully complimentary output stages with built in short circuit, open circuit, thermal and under voltage protection.

  • Built in cross pole crowbar protection diode

  • Microcontroller controlled amplifier.

  • Volume Up, Volume Down plus 10 preset volumes, standby (sleep) and mute functions.

  • Bedroom friendly LEDs follow ambient light and get darker as the room gets darker.

  • Led indication of Power On/Off and volume Up/Down.

  • Installer friendly screw terminals for speaker & line input





Fixed volume Installations





If required the KLAB can be configured to operate with a fixed volume output which is useful for commercial applications where a preset volume is required. If it's to be used in an environment where the volume will not need to be changed and the unit will always be on, it can also be configured to make the remote control inoperative.



Specification





Power output: 20W RMS per channel into 4ohms

Distortion: typically less than 0.2% up to rated power

Bandwidth: 20Hz to 20KHz Passive limitation built in

Supply: 10V to 15V (absolute max 18V DC) minimum current 3.0A. Connection via a 2.1mm DC connector centre positive, auto mute on under voltage.

Fuse: self resetting 3A built in - to clear remove power for at least 20 seconds, clear fault and reconnect

Amplifier topology: full bridge mode all speaker connections are live ( no common ground connection)

Recommended minimum speaker impedance: 4 ohms per channel

Absolute minimum speaker impedance: 2 ohms per channel

SNR: 60dB

Voltage gain: 27dB

Input required to produce full output: approx 775Mv



Whats in the box?





KLAB20 Amplifier

KLABPSU Power supply

Remote Control

2 RCA Phono sockets to open end line input cable

Screwdriver

Fixing screws

Instruction sheet


Reviews

Why Buy From Tech4

Payment & Security

American Express Apple Pay Google Pay Maestro Mastercard PayPal Shopify Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed